Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STYRON A-TECH™ 1210 - (PS-HI) - Trinseo

Material Data Center offers the following functions for STYRON A-TECH™ 1210:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styron A-Tech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 3.4 g/10min ISO 1133
Temperatura 200 °C -
Carga 5 kg -
ASTM Dados
Índice de fluidez, MFI 3.4 g/10min ASTM D 1238
Temperatura 200 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1750 MPa ISO 527
Tensão no escoamento 19.5 MPa ISO 527
Tensão na ruptura 22 MPa ISO 527
Deformação na ruptura 65 % ISO 527
Módulo de flexão, 23°C 1950 MPa ISO 178
Resistência à flexão 38 MPa ISO 178
ASTM Dados
Módulo de tração 1750 MPa ASTM D 638
Resistência à tração no escoamento 19.5 MPa ASTM D 638
Resistência à tração na ruptura 22 MPa ASTM D 638
Deformação na ruptura 65 % ASTM D 638
Módulo de flexão 1950 MPa ASTM D 790
Resistência à flexão 38 MPa ASTM D 790
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de amolecimento Vicat , A 98 °C ISO 306
ASTM Dados
Temperatura de amolecimento Vicat 98 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1040 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Densidade 1040 kg/m³ ASTM D 792
Características
Processamento
Extrusão de chapas, Termoformagem
Características especiais
Alto impacto.
Características
Mistura de resina
Certifications
Contacto com alimentos, Aprovação para contacto com alimentos10/2011, Aprovação de alimentos FDA 21 CFR
Aplicaciones
Médico, Embalaje
Disponibilidade regional
Europa, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.